Jaw crusher is the primary crusher, it is the necessary equipment for a lot of ore production line, as a first step crushing, production efficiency directly determines the efficiency of the entire line, while the jaw crusher work are usually bad environment relatively poor therefore we need to understand their notes on installation to prevent late because of improper installation problems.
1, due to the vibration of large jaw crusher at work, the machine should be installed in the concrete foundation, in order to reduce vibration, noise and the impact on the surrounding built structures based between the crusher and concrete foundation pad to pad hardwood plates, rubber band, or other cushioning material.
2, row-based mine shafts to lay a metal plate, and has sufficient inclination angle (depending on the flow of materials should be determined, not less than 50 °), so as not to impede the smooth discharge of the crushed product.
3, the nesting population size should be required to adjust the particle size. When adjusting, loosen the T-line bolt and tensioning springs. Use a bolt from the top to open the top seat adjustment, inserting or removing the appropriate thickness shim, and then returned from the top bolt, adjust the seat under the action of gravity moving jaw, ear close to the seat frame, while the gasket pressure group rope together. Thereafter, when the spring preload adjustment to ensure the machine is working, so that the thrust plate and thrust plate against the pad. But pre-pressure should not be too large, it does not happen percussion, finally locking seat adjustment.
